G8 V6-3.6L (2008)
Important: DO NOT distort or bend the left hand engine mount heat shield (4).
1. Install the left hand engine mount bracket (1).
Notice: Refer to Fastener Notice (See: Service Precautions/Vehicle Damage Warnings/Fastener Notice) .
2. Install the left hand engine mount bracket to cylinder block retaining bolts (2).
Tighten the bolts to 60 N.m (44 lb ft).
3. Position the left hand engine mount (5) on the left hand engine mount bracket (1).
4. Install the left hand engine mount to engine mount bracket retaining nut (3).
Tighten the nut to 80 N.m (59 lb ft).
5. Lower the engine until the weight is resting on the left hand engine mount.
Caution: Refer to Safety Glasses Caution (See: Service Precautions/Technician Safety Information/Safety Glasses Warning) .
Caution: Refer to Vehicle Lifting Caution (See: Maintenance/Vehicle Lifting/Service Precautions) .
6. Raise the vehicle.