G8 V6-3.6L (2008)
7. Install the fuel injector harness electrical connector/EVAP valve mounting bracket (5) to the intake manifold (1).
8. Install the fuel injector harness electrical connector/EVAP valve mounting bracket to intake manifold retaining bolt (2).
9. Connect the fuel injector harness electrical connector (3)
10. Connect the EVAP valve electrical connector (4)
11. Install the PCV tube and PCV fresh air tubes. Refer to Positive Crankcase Ventilation Hose/Pipe/Tube Replacement (See: Powertrain
Management/Emission Control Systems/Positive Crankcase Ventilation/PCV Valve Hose/Service and Repair) .