G8 V6-3.6L (2008)
Important: Bolts with micro-encapsulated thread sealant must be discarded after removal.
Important: Make sure all the bolt holes are thoroughly cleaned and all micro-encapsulated thread sealant is removed.
19. Remove the power steering fluid reservoir bracket to engine front cover retaining bolts (5).
* Discard the bolts.
* Clean the bolt holes.
20. Remove the power steering fluid reservoir bracket (6).
Important: Bolts with micro-encapsulated thread sealant must be discarded after removal.
Important: Make sure all the bolt holes are thoroughly cleaned and all micro-encapsulated thread sealant is removed.
21. Remove the power steering bracket to cylinder head retaining bolt (3).
* Discard the bolt.
* Clean the bolt hole.
Important: Bolts with micro-encapsulated thread sealant must be discarded after removal.
Important: Make sure all the bolt holes are thoroughly cleaned and all micro-encapsulated thread sealant is removed.
22. Remove the power steering bracket to engine front cover retaining bolt (1).
* Discard the bolt.
* Clean the bolt hole.
Important: Bolts with micro-encapsulated thread sealant must be discarded after removal.
Important: Make sure all the bolt holes are thoroughly cleaned and all micro-encapsulated thread sealant is removed.
23. Remove the power steering bracket to cylinder block retaining bolt (2).
* Discard the bolt.
* Clean the bolt hole.
24. Remove the power steering pump bracket (4).