G8 V6-3.6L (2008)
1. Install the right air temperature actuator (2) to the HVAC module assembly (3).
Notice: Refer to Fastener Notice (See: Service Precautions/Vehicle Damage Warnings/Fastener Notice) .
2. Install the right air temperature actuator to HVAC module assembly retaining screws (1).
Tighten the screws to 1 N.m (9 lb in).
3. Connect the right air temperature actuator electrical connector (1).
4. Install the air inlet assembly. Refer to Air Inlet Assembly Replacement (See: Air Duct/Service and Repair/Air Inlet Assembly Replacement) .
5. Perform HVAC system relearn. Refer to HVAC Control Module Programming and Setup (See: Testing and Inspection/Programming and
Relearning) .
Temperature Valve Actuator Replacement - Left Side
Temperature Valve Actuator Replacement - Left Side
Refer to Temperature Valve Actuator Replacement - Left Side (See: HVAC - Manual/Temperature Valve Actuator Replacement - Left Side) .