G8 V6-3.6L (2008)
Evaporator Core: Service and Repair
Air Conditioning Evaporator Core Replacement
Removal Procedure
1. Remove the HVAC module assembly. Refer to HVAC Module Assembly Replacement (See: Housing Assembly HVAC/Service and Repair) .
2. Disconnect the main mode actuator electrical connector (1).
3. Disconnect the air mix actuator electrical connector (2).
4. Disconnect the rear mode actuator electrical connector (3).
5. Detach the wiring harness (5) from the HVAC module assembly (4).
6. Detach the wiring harness (1) from the HVAC module assembly (2).