G8 V6-3.6L (2008)
Important: Mark the position of heater hoses (3) and heater hose retaining clamps (1) before removal to make sure of correct alignment
during assembly.
3. Using J 38185 compress the heater hose retaining clamps (1) and slide along the heater hoses (3).
4. Disconnect the heater hoses (3) from the water pump housing (2).
Important: Using a suitable tool, detach the lower heater hose (3) by releasing the heater hose quick connect fitting retaining clip (2).
5. Detach the lower heater hose (3) from the heater hose quick connect fitting (2).
6. Remove the lower heater hose (3).
Installation Procedure - Lower
