G8 V6-3.6L (2008)
5. Install the upper radiator support brackets (1).
6. Remove the plugs or caps from the suction/discharge pipes (1) and the ports on the compressor (3).
Important: DO NOT coat the sealing washers (2) with oil, they must be fitted dry. The use of mineral oil will render the washer useless,
as the sealing washers (2) WILL swell causing refrigerant to leak out.
7. Install two NEW sealing washers (2). Refer to Sealing Washer Replacement (See: Coupler HVAC/A/C Coupler O-ring/Service and
Repair/Sealing Washer Replacement) .
8. Connect the suction/discharge pipes (1) to the compressor (3).