G8 V6-3.6L (2008)
Notice: Refer to Fastener Notice (See: Service Precautions/Vehicle Damage Warnings/Fastener Notice) .
15. Install the suction pipe/liquid pipe pad to TX valve retaining nut (1).
Tighten the nut to 22 N.m(16 lb ft).
16. Remove the plugs or caps from the suction pipe upper (1) and the suction pipe lower (2).
Important: DO NOT coat the NEW sealing washer (3) with oil, they must be fitted dry. The use of mineral oil will render the sealing
washer (3) useless, as the sealing washer (3) WILL swell causing refrigerant to leak out.
17. Install a NEW sealing washer (3). Refer to Sealing Washer Replacement (See: Coupler HVAC/A/C Coupler O-ring/Service and Repair/Sealing
Washer Replacement) .
