G8 V6-3.6L (2008)
Important: A Schrader valve is fitted to the A/C refrigerant pressure sensor port (1). Upon removal of the A/C refrigerant pressure
sensor (3) you will, for a very short period, hear refrigerant escape until the Schrader valve reseats. If refrigerant continues to escape
while removing the A/C refrigerant pressure sensor (3) STOP IMMEDIATELY. The Schrader valve has a fault and the refrigerant will
have to be recovered.
3. Remove the A/C refrigerant pressure sensor (3) from the A/C refrigerant pressure sensor port (1).
Important: The O-ring seal (2) is a single use item and must be discarded after use.
4. Remove the O-ring seal (2). Refer to O-Ring Replacement (See: Coupler HVAC/A/C Coupler O-ring/Service and Repair/O-Ring Replacement) .
Discard the O-ring seal.
Installation Procedure
