G8 V6-3.6L (2008)
1. Install the new stop/tail lamp bulb (1) into the socket (2) by pushing and rotating the bulb clockwise.
Important: The different sized tabs on the bulb base and mating cut-outs in the tail lamp assembly allow the bulb to seat correctly.
2. Install the stop/tail lamp bulb (1) and socket (2) into the rear tail lamp assembly and secure by rotating the socket clockwise.
3. Connect the battery ground cable. Refer to Battery Negative Cable Disconnection and Connection (See: Starting and Charging/Battery/Battery
Cable/Service and Repair) .
4. Check all vehicle lights for correct operation.