G8 V6-3.6L (2008)
8. Remove the suction pipe upper to suction pipe lower retaining nut (1).
9. Disconnect the suction pipe upper (1) from suction pipe lower (2).
Important: The sealing washer (3) is a single use item and must be discarded after use.
10. Remove the sealing washer (3). Refer to Sealing Washer Replacement (See: Heating and Air Conditioning/Coupler HVAC/A/C Coupler
O-ring/Service and Repair/Sealing Washer Replacement) .
Discard the sealing washer
Important: Cover any opening of the A/C system with a suitable cap or tape immediately, to prevent absorption of moisture from the
atmosphere.
11. Cap or plug the suction pipe upper (1) and the suction pipe lower (2).