G8 V6-3.6L (2008)
6. Remove the plugs or caps from the suction pipe liquid pipe (1) and the condenser port (3).
Important: DO NOT coat the NEW sealing washer (2) with oil, they must be fitted dry. The use of mineral oil will render the sealing
washer (2) useless, as the sealing washer (2) WILL swell causing refrigerant to leak out.
7. Install a NEW sealing washer (2). Refer to Sealing Washer Replacement (See: Heating and Air Conditioning/Coupler HVAC/A/C Coupler
O-ring/Service and Repair/Sealing Washer Replacement) .
8. Connect the liquid pipe (1) to the condenser port (3).
9. Install the liquid pipe to condenser port retaining nut (1).
Tighten the nut to 22 N.m(16 lb ft).
10. Install the air deflector front. Refer to Front Air Deflector Replacement (See: Body and Frame/Spoilers, Flaps, and Air Dams/Air Dam/Service
and Repair) .
11. Lower the vehicle.