G8 V6-3.6L (2008)
Power Steering Line/Hose: Service and Repair
Power Steering Fluid Reservoir Inlet Hose Replacement (3.6L Engine)
Power Steering Fluid Reservoir Inlet Hose Replacement (3.6L Engine)
Removal Procedure
Caution: Refer to Safety Glasses Caution (See: Service Precautions/Technician Safety Information/Safety Glasses Warning) .
Caution: Refer to Vehicle Lifting Caution (See: Vehicle Lifting/Service Precautions) .
1. Remove the engine dress cover. Refer to Engine Cover Replacement (See: Engine, Cooling and Exhaust/Engine/Service and Repair/Removal and
Replacement/Engine Cover Replacement) .
2. Remove the upper section of the air box. Refer to Air Cleaner Assembly Replacement (See: Filters/Air Cleaner Housing/Service and Repair) .
3. Remove the air inlet duct. Refer to Air Cleaner Inlet Duct Replacement (See: Filters/Air Cleaner Housing/Air Cleaner Fresh Air
Duct/Hose/Service and Repair) .
4. Place a large suitable container under the vehicle in order to collect draining power steering fluid.
5. Remove the power steering fluid reservoir inlet pipe/hose bracket to subframe retaining bolt (4).
Important: The power steering fluid reservoir (1) must be plugged to prevent the entry of foreign particles into the power steering
system.
6. Release the power steering fluid reservoir inlet pipe/hose spring clamp (2) and disconnect the power steering fluid reservoir inlet pipe/hose (3)
from the power steering fluid reservoir (1).
7. Plug the power steering fluid reservoir (1).
8. Remove the front air deflector. Refer to Front Air Deflector Replacement (See: Body and Frame/Spoilers, Flaps, and Air Dams/Air Dam/Service
and Repair) .