G8 V6-3.6L (2008)
2. Connect the body control module (BCM) electrical connectors (1) to the BCM (2).
3. Install the instrument panel retainer. Refer to Instrument Panel Retainer Replacement (See: Body and Frame/Interior Moulding / Trim/Dashboard
/ Instrument Panel/Service and Repair) .
4. Install the knee bolster. Refer to Knee Bolster Replacement (See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument
Panel/Service and Repair) .
5. Install the left closeout insulator panel. Refer to Instrument Panel Insulator Panel Replacement - Left Side (LHD) (See: Body and Frame/Interior
Moulding / Trim/Dashboard / Instrument Panel/Service and Repair) .
Caution: Refer to SIR Caution (See: Restraint Systems/Service Precautions/Technician Safety Information/SIR Caution) .
6. Enable the SIR system. Refer to SIR Disabling and Enabling (See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Air
Bag(s) Arming and Disarming/Service and Repair) .
7. Connect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection (See: Starting and Charging/Battery/Battery
Cable/Service and Repair) .