G8 V6-3.6L (2008)
8. Install the EN 46105 (2) onto the rear of the left side camshafts (1).
Notice: Refer to Torque Reaction Against Timing Drive Chain Notice (See: Engine, Cooling and Exhaust/Engine/Timing Components/Service
Precautions).
Important:
*
Use an open-end wrench at the camshaft hex to prevent camshaft/engine rotation.
*
DO NOT remove the camshaft position actuator to camshaft retaining bolt at this time.
9. Loosen the left side intake camshaft position actuator to camshaft retaining bolt.
10. Loosen the EN-48313 so that the legs are retracted.