G8 V6-3.6L (2008)
Variable Valve Timing Solenoid: Service and Repair
Camshaft Position Actuator Solenoid Valve Solenoid Replacement - Bank 1 (Right Side) Intake
Camshaft Position Actuator Solenoid Valve Solenoid Replacement - Bank 1 (Right Side) Intake
Removal Procedure
1. Turn the ignition OFF.
Important: Do not remove the engine Control Module (ECM) from the ECM bracket.
Do not remove the ECM redundant ground wire from the ECM.
2. Remove the remote earth post bracket to engine front cover retaining bolts.
3. Remove the camshaft position (CMP) actuator valve electrical connector (1) from the CMP sensor (2).