G8 V6-3.6L (2008)
Evaporative Emissions Hose: Service and Repair
Evaporative Emission (EVAP) Hoses/Pipes Replacement - Chassis/Canister
Evaporative Emission Hoses/Pipes Replacement - Chassis/Canister
Removal Procedure
*
Do not attempt to repair sections of nylon pipes. Replace damaged nylon pipes.
*
Replace the vapour hoses/pipes with original equipment or parts that meet original specifications.
Caution: Refer to Safety Glasses Caution (See: Service Precautions/Technician Safety Information/Safety Glasses Warning) .
Caution: Refer to Vehicle Lifting Caution (See: Maintenance/Vehicle Lifting/Service Precautions) .
1. Raise the vehicle. Refer to Lifting and Jacking the Vehicle (See: Maintenance/Vehicle Lifting/Service and Repair) .
2. Remove the rear frame. Refer to Rear Frame Replacement (See: Body and Frame/Frame/Subframe/Rear Subframe/Service and Repair) .
3. Remove the fuel tank. Refer to Fuel Tank Replacement (See: Fuel Delivery and Air Induction/Fuel Tank/Service and Repair) .
4. Disconnect the canister purge pipe (1) from the canister.
5. Remove the canister vent pipe (3) from the canister by twisting and pulling it away from the canister.
6. Remove the canister to under body retaining bolts (2).
7. Remove the evaporative emission canister from the vehicle.
8. Remove the EVAP hose from the fuel tank.
Installation Procedure