G8 V6-3.6L (2008)
Torque Converter Clutch Solenoid: Service and Repair
Torque Converter Clutch Solenoid Replacement
Removal Procedure
1. Remove the transmission fluid pan and filter. Refer to Automatic Transmission Fluid and Filter Replacement (See: Transmission and
Drivetrain/Automatic Transmission/Transaxle/Service and Repair/Removal and Replacement) .
2. Disconnect the electrical connector (1) from the torque converter clutch (TCC) pulse width modulation (PWM) solenoid valve (2).
3. Using a small suitable tool, remove the TCC PWM solenoid valve retainer from the control valve body.
4. Remove the TCC PWM solenoid valve (1) from the control valve body.
5. Remove the O-ring seals (3-4) from the TCC PWM solenoid valve (1), ONLY if the O-rings are cut or worn.
Installation Procedure