G8 V6-3.6L (2008)
11. Install the power steering gear outlet pipe/hose bracket to subframe retaining bolt (1).
Tighten the bolt to 9 N.m (80 lb in).
12. Install the engine dress cover. Refer to Engine Cover Replacement (See: Engine, Cooling and Exhaust/Engine/Service and Repair/Removal and
Replacement/Engine Cover Replacement) .
13. Remove the air inlet duct. Refer to Air Cleaner Inlet Duct Replacement (See: Engine, Cooling and Exhaust/Engine/Tune-up and Engine
Performance Checks/Air Cleaner Housing/Air Cleaner Fresh Air Duct/Hose/Service and Repair) .
Notice: When adding fluid or making a complete fluid change, always use the proper power steering fluid. Failure to use the proper fluid will
cause hose and seal damage and fluid leaks.
14. Fill power steering fluid reservoir with fluid to the MAX level mark on the reservoir.
15. Bleed the power steering system. Refer to Power Steering System Bleeding (See: Power Steering Bleeding/Service and Repair) .
16. Check for power steering fluid leaks.
Power Steering Gear Outlet Pipe/Hose Replacement (6.0L Engine)
Power Steering Gear Outlet Pipe/Hose Replacement (6.0L Engine)
Removal Procedure
1. Remove the engine dress cover. Refer to Engine Front Cover Replacement (See: Engine, Cooling and Exhaust/Engine/Timing
Components/Timing Cover/Service and Repair) .
2. Remove the air intake duct. Refer to Air Cleaner Assembly Replacement (See: Engine, Cooling and Exhaust/Engine/Tune-up and Engine
Performance Checks/Air Cleaner Housing/Service and Repair) .