G8 V6-3.6L (2008)
Fluid Filter - A/T: Service and Repair
5L40-E/5L50-E - Automatic Transmission
Automatic Transmission Fluid and Filter Replacement
Tools Required
*
J 6125-1B Slide Hammer Adapter
*
J 23129 Universal Seal Remover
Removal Procedure
1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle (See: Maintenance/Vehicle Lifting/Service and Repair) .
2. Place a suitable drain pan under the transmission fluid drain plug.
3. Remove and discard the transmission fluid drain plug.
4. Allow the transmission fluid to drain.
5. Inspect the transmission fluid for discoloration and contamination while draining.
Notice: Refer to Component Fastener Tightening Notice (See: Service Precautions/Vehicle Damage Warnings/Component Fastener Tightening
Notice) .
6. After the transmission fluid has finished draining, Install a NEW transmission fluid drain plug.
Tighten the fluid drain plug to 20 N.m (15 lb. ft).