G8 V6-3.6L (2008)
6. Tighten the centre bearing to body retaining bolts (1).
Tighten the bolts to 22 N-m (15 lb ft).
7. Install the propeller shaft heat shield. Refer to Exhaust Heat Shield Replacement - Center (See: Engine, Cooling and Exhaust/Exhaust
System/Heat Shield/Service and Repair/Exhaust Heat Shield Replacement - Center) .
8. Install the intermediate exhaust assembly. Refer to Exhaust Crossover Pipe Replacement (See: Engine, Cooling and Exhaust/Exhaust
System/Exhaust Pipe/Service and Repair) .
9. Remove the safety stands.
10. Lower the vehicle to the ground.