G8 V8-6.0L (2009)
Danger: To avoid any vehicle damage, serious personal injury or death when major components are removed from the vehicle and the
vehicle is supported by a hoist, support the vehicle with jack stands at the opposite end from which the components are being removed
and strap the vehicle to the hoist.
9. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle (See: Maintenance/Vehicle Lifting/Service and Repair).
10. Remove the air deflector. Refer to Front Air Deflector Replacement (See: Body and Frame/Spoilers, Flaps, and Air Dams/Air Dam/Service and
Repair).
11. Remove the coolant inlet pipe to alternator bracket retaining (2).
12. Lower vehicle
13. Remove the retaining bolt (1) which secures the inlet pipe (2) to the thermostat housing (4).
14. Manoeuvre the coolant inlet pipe towards the front of the engine and remove it from below, between the cross member and radiator.
15. Remove the coolant inlet pipe O-ring (3).
Installation Procedure
