G8 V8-6.0L (2009)
Communications Control Module: Service and Repair
Communication Interface Module Bracket Replacement
Communication Interface Module Bracket Replacement
Removal Procedure
1. Remove the vehicle communication interface module (VCIM). Refer to Communication Interface Module Replacement (See: Communication
Interface Module Replacement).
2. Disengage the VCIM bracket to body retaining clips (2).
3. Lower the rear end of the VCIM bracket (3) away from the body (1).
4. Slide the VCIM bracket retainer (2) out of the body slot (1).
5. Remove the VCIM bracket (3) from the vehicle.
Installation Procedure