G8 V8-6.0L (2009)
6. Attach the electrical connector (1) to the right hand rail (2).
7. Connect the wheel speed sensor jumper harness electrical connector (1).
8. Install the rear wheels. Refer to Tire and Wheel Removal and Installation (See: Maintenance/Wheels and Tires/Service and Repair).
9. Lower the vehicle.
10. Use the scan tool in order to clear any DTCs.
11. Perform the System Check - Vehicle. Refer to Diagnostic System Check - Vehicle (See: Testing and Inspection/Initial Inspection and Diagnostic
Overview/Diagnostic System Check - Vehicle).
Front Wheel Speed Sensor Reluctor Wheel Replacement
Front Wheel Speed Sensor Reluctor Wheel Replacement
The front wheel speed sensor tone wheels are integral with the hub and bearing assemblies. If a front wheel speed sensor tone wheel needs replacement,
you must replace the entire hub and bearing assembly. Refer to Front Wheel Bearing and Hub Replacement (See: Maintenance/Wheels and
Tires/Wheel Bearing/Service and Repair/Front Suspension).
Rear Wheel Speed Sensor Ring Replacement
Rear Wheel Speed Sensor Ring Replacement
The rear wheel speed sensor tone wheels are integral with the hub and bearing assemblies. If a rear wheel speed sensor tone wheel needs replacement,
you must replace the entire hub and bearing assembly. Refer to Rear Wheel Bearing and Hub Replacement (See: Maintenance/Wheels and Tires/Wheel
Bearing/Service and Repair/Rear Suspension).