G8 V8-6.0L (2009)
2. Connect the SIR coil assembly connectors, (1) to (2).
3. Install the wipers/washer switch. Refer to Windshield Wiper and Washer Switch Replacement (See: Sensors and Switches - Wiper and Washer
Systems/Windshield Washer Switch/Service and Repair).
4. Install the cruise control switch. Refer to Turn Signal Switch Replacement (See: Sensors and Switches - Lighting and Horns/Turn Signal
Switch/Service and Repair).
5. Remove the SIR coil assembly securing tape.
6. Install the steering column trim covers. Refer to Steering Column Trim Cover Replacement (See: Steering and Suspension/Steering/Steering
Column/Service and Repair/Steering Column Trim Cover Replacement).
7. Install the steering wheel. Refer to Steering Wheel Replacement (See: Steering and Suspension/Steering/Steering Column/Service and
Repair/Steering Wheel Replacement).
8. Install the inflatable restraint steering wheel module to the steering wheel. Refer to Steering Wheel Inflatable Restraint Module Replacement (
See: Restraint Systems/Air Bag Systems/Air Bag/Service and Repair).
9. Connect the battery ground cable. Refer to Battery Negative Cable Disconnection and Connection (See: Starting and Charging/Battery/Battery
Cable/Service and Repair).
10. Enable the SIR system. Refer to SIR Disabling and Enabling (See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Air
Bag(s) Arming and Disarming/Service and Repair).
11. Calibrate the steering angle sensor. Refer to Steering Angle Sensor Centering (See: Sensors and Switches - Brakes and Traction Control/Steering
Angle Sensor/Service and Repair).
