Pontiac Workshop Service and Repair Manuals

Receiver Dryer: Service and Repair

R/D And A/C Line Mounting

REMOVE OR DISCONNECT

1.  Negative battery cable.
2.  Recover refrigerant.
3.  Raise vehicle.
4.  Right front tire/wheel assembly.
5.  Partially remove splash shield.
6.  Both lines at receiver dehydrator and discard 0-ring seals.
7.  Receiver dehydrator bracket bolts.
8.  Receiver dehydrator assembly.
9.  Receiver dehydrator from bracket.

INSTALL OR CONNECT

1.  Receiver dehydrator to bracket.
2.  Receiver dehydrator assembly. 
3.  Receiver dehydrator bracket bolt.
4.  Both lines at receiver dehydrator using new 0-ring seals.
5.  Right splash shield.
6.  Tire/wheel assembly.
7.  Lower vehicle.
8.  Negative battery cable.
9.  Evacuate and recharge A/C system.

10.  Leak test.