Grand AM L4-144 2.4L DOHC VIN T SFI (1997)
Seat Belt Reminder Lamp: Description and Operation
The Seat Belt Indicator is controlled by the IPC via serial data based on status of the Seat Belt Switch. The status of the Seat Belt Switch is received
from the SDM. The indicator will light when ignition is in the "RUN" or "CRANK" positions and the driver's safety belt is not fastened. Also, the
Multi-Function Alarm Module will sound when the Ignition Switch is turned to the "RUN" position with the driver's safety belt not fastened. The chime
will silence as soon as the driver's safety belt is fastened or within six seconds, whichever occurs first, The Seat Belt Indicator will light steady for 20
seconds and then flash for an additional 55 seconds. The indicator will go out as soon as the driver's safety belt is fastened or the light times out,
whichever occurs first. Please note that unbuckling the seat belt will result in this sequence repeating. During a loss of serial data (ignition in
"OFF/UNLOCK"), the telltale will light steady.
