Grand AM V6-3.4L VIN E (2001)
18.
Install the remote control receiver module to the center of the rear panel in the space provided.
19.
Connect the new wiring harness connector to the remote control receiver module.
20.
Locate ground splice pack (G401). It is a black connector about 38 mm (1.5 in) square next to the left rear speaker. Remove the retaining screw
and CPA from the connector.
21.
Route the black wire of the new harness to left side ground splice pack. Insert the terminal for the black wire into any empty cavity. Re-install the
CPA and retaining screw.
