Grand AM V6-3.4L VIN E (2001)
Front Door Panel: Service and Repair
Bezel Replacement
Door Handle Bezel Replacement
DOOR HANDLE BEZEL REPLACEMENT
REMOVAL PROCEDURE
1. Remove the screw (1) from the bezel.
2. Pull the front of the bezel out of the door trim panel (2).
3. Lift the door handle and remove the bezel.
INSTALLATION PROCEDURE
1. Push the bezel into the trim panel, making sure the rear tabs engage and press until fully seated.
NOTE: Refer to Fastener Notice in Service Precautions.
2. Install the door handle bezel screw (1).
Tighten
Tighten the front/rear door handle bezel screw to 2 N.m (18 lb in).
Door Handle Bezel Replacement (Pontiac)