Grand AM V6-3.4L VIN E (2001)
Front Door Window Regulator: Service and Repair
Front Side Door Window Regulator Opening Cover Replacement
Front Side Door Window Regulator Opening Cover Replacement
Removal Procedure
1. Remove the door trim panel.
2. Remove the door water deflector.
3. Remove the nuts from the access cover.
4. Remove the regulator drive cable from the rear of the cover plate and remove the cover plate from the door.
Installation Procedure
1. Position the access cover in the door.
Notice: Refer to Fastener Notice in Service Precautions.
2. Install the nuts to the access cover plate.
Tighten the access cover plate nuts to 10 N.m (89 lb in).
Important: The regulator drive cable goes into position (2) for the coupe and position (3) for the sedan.
3. Install the regulator drive cable (1) to the rear of the cover plate.
4. Install the water deflector.
5. Install the door trim panel.