Grand AM V6-3.4L VIN E (2001)
![background image](/pontiac/grand_am/v6-3.4l_vin_e/Page-2402001.png)
Headliner: Service and Repair
Headlining Trim Panel Replacement
Removal Procedure
The one-piece formed headliner consists of a molded substrate that is covered with a foam-backed cloth facing.
1. Remove the coat hooks.
2. Remove the sunshades.
3. Remove the sunshade anchor.
4. Remove the roof rail assist handle, if equipped.
5. Remove the dome lamp (1).
6. Pull down the door weatherstrips, as required.
7. Remove the sunroof lacing, if equipped.
8. Remove the sunroof switch, if equipped.
9. Remove the windshield side upper garnish moldings.
10. Remove the center pillar upper trim panel.
11. Remove the rear quarter upper trim panel.
12. Pull down of the front of the overhead console to release its clips.
13. Pull down the headliner above the left front door. Disconnect the actuator harness connector attached to the headliner.