Grand AM V6-3.4L VIN E (2001)
3. Remove the bolster cover from the pad by pulling the cover up and over the pad.
Installation Procedure
1. Position the back bolster cover onto the pad.
2. Install the back bolster cover by pulling down and over the pad.
3. Pull the bolster cover over the U-bracket.
4. Install the seat back bolster.
Rear Split Folding Seat Back Bolster Replacement
Rear Split Folding Seat Back Bolster Replacement
Removal Procedure
1. Remove the rear seat cushion.
2. Remove the bolt from the lower U-bracket.
3. Lift up the seat back bolster to disengage the T-hook from the access hole in the rear shelf.
4. Remove the seat back bolster.
Installation Procedure
