Grand AM V6-3.4L VIN E (2001)
1. Install the seat back frame to the seat back recliner.
Notice: Refer to Fastener Notice in Service Precautions.
2. Install the seat back recliner bolts.
Tighten the bolts to 24 N.m (18 lb ft).
3. Install the lumbar support to the seat back frame, if required.
4. Install the seat back pad to the seat back frame.
5. Install the seat back cushion cover.
Rear Seat Back Replacement
Rear Seat Back Replacement
Removal Procedure
1. Remove the rear seat cushion.
2. Remove the stationary rear seat back bolts (1) from the lower rear seat back U-brackets.
3. Remove the rear seat back by lifting up and disengaging the T-hooks from the access holes in the rear shelf panel.
Installation Procedure