Grand AM V6-3.4L VIN E (2001)
Brake Pedal Assy: Service and Repair
Brake Pedal Assembly Replacement
Removal Procedure
1. Remove the left closeout/insulator panel.
2. Disconnect the accelerator cable from the accelerator pedal.
3. Disconnect the brake pedal pushrod (1) from the brake pedal (2).
4. Remove the brake switch (1) from the brake pedal.
5. Disconnect the electrical harness from the brake pedal.
6. Remove the upper (1) and the lower (2) mounting nuts from the brake pedal assembly.
7. Remove the brake pedal assembly.
Installation Procedure