Grand AM V6-3.4L VIN E (2001)
9. Using the J38185, reposition the hose clamp at the thermostat bypass pipe.
10. Disconnect the thermostat bypass pipe hose.
11. Remove the thermostat bypass pipe-to-engine front cover bolt.
12. Remove the thermostat bypass pipe.
Installation Procedure
1. Install the thermostat bypass pipe.
Notice: Refer to Fastener Notice in Service Precautions.
2. Install the thermostat bypass pipe-to-engine front cover bolt.
Tighten the thermostat bypass pipe-to-front cover bolt to 11 Nm (98 inch lbs.).