Grand AM V6-3.4L VIN E (2001)
![background image](/pontiac/grand_am/v6-3.4l_vin_e/Page-624001.png)
Drive Belt Tensioner: Service and Repair
Removal Procedure
1. Remove the drive belt.
2. Remove the drive belt tensioner mounting bolt.
3. Remove the drive belt tensioner.
Installation Procedure
1. Install the drive belt tensioner.
Notice: Refer to Fastener Notice in Service Precautions.
2. Install the drive belt tensioner bolt.
Tighten the drive belt tensioner bolt to 45 Nm (33 ft. lbs.).
3. Install the drive belt.