Grand AM V6-3.4L VIN E (2001)
Air Door Actuator / Motor: Service and Repair
Recirculation Actuator Replacement
REMOVAL PROCEDURE
1. Remove the Instrument Panel (IP) carrier. Refer to Trim Pad Replacement - IP in Instrument Panel, Gauges and Console.
2. Disconnect the orange vacuum hose from the recirculation actuator.
3. Remove the recirculation actuator.
3.1.
Lift the actuator lock tab.
3.2.
Slide off the actuator.
4. Remove the actuator linkage from the recirculation actuator.
Turn the linkage to remove.
INSTALLATION PROCEDURE