Grand AM V6-3.4L VIN E (2001)
7. Install a NEW O-ring seal on the condenser tube.
NOTE: Refer to Fastener Notice in Service Precautions.
8. Install the evaporator hose assembly and the bolt to the condenser.
Tighten
Tighten the bolt to 25 N.m ( 18 lb ft).
9. Lower the vehicle.
10. Evacuate and charge the A/C system. Refer to Refrigerant Recovery and Recharging.
11. Leak test the fittings of the component using the J 39400-A.