Grand AM V6-3.4L VIN E (2001)
![background image](/pontiac/grand_am/v6-3.4l_vin_e/Page-2823001.png)
Turn Signal Switch: Service and Repair
Removal Procedure
Caution: Refer to SIR Caution in Service Precautions.
1. Disable the Supplemental Inflatable Restraints (SIR). Refer to Enabling the SIR System in Restraint Systems.
2. Remove the steering column trim cover. Refer to Steering Column Trim Covers Replacement- On Vehicle.
3. Remove the multifunction switch (2) retaining screw.
4. Disconnect the electrical connectors (3) from the multifunction switch (1).
5. Remove the multifunction switch (1) from the steering column (2).
Installation Procedure
1. Position the multifunction switch (1) on the steering column (2) while depressing the spring loaded horn pin.
2. Connect the electrical connectors to the multifunction switch (1).
Notice: Refer to Fastener Notice in Service Precautions.