Grand AM V6-3.4L VIN E (2001)
Coolant Line/Hose: Service and Repair
Coolant Pipe Replacement
Coolant Pipe Replacement - Intake
Removal Procedure
1. Drain cooling system.
2. Remove the exhaust manifold heat shield.
3. Remove the coolant inlet pipe bolts through the exhaust manifold.
4. Raise the vehicle. Refer to Vehicle Lifting.
5. Remove the tire and wheel assembly.
6. Remove the engine splash shield.
7. Remove the bolts from the transaxle-to-engine block brace and remove the brace.
8. Remove the radiator hose from the coolant inlet pipe.
9. Remove the coolant inlet pipe to oil pan bolt.
10. Remove the coolant inlet pipe, thermostat and seal.
Installation Procedure
1. Install the seal and the inlet pipe.
Notice: Refer to Fastener Notice in Service Precautions.