Grand AM V6-3.4L VIN E (2001)
Hose/Line HVAC: Service and Repair
Compressor Hose Assembly Replacement
TOOLS REQUIRED
J 39400-A Halogen Leak Detector
REMOVAL PROCEDURE
1. Recover the refrigerant. Refer to Refrigerant Recovery and Recharging.
2. Disconnect the refrigerant pressure sensor electrical connector.
3. Remove the bolt holding the compressor hose bracket to the fan shroud.
4. Remove the compressor hose from the condenser.
5. Remove and discard the O-ring seal.
6. Raise the vehicle. Refer to Lifting and Jacking the Vehicle.
7. Remove the right front fender liner. Refer to Front Fender Liner Replacement.