Grand AM V6-3.4L VIN E (2001)
![background image](/pontiac/grand_am/v6-3.4l_vin_e/Page-1145001.png)
EGR Valve: Service and Repair
EXHAUST GAS RECIRCULATION (EGR) VALVE REPLACEMENT
REMOVAL PROCEDURE
1. Turn OFF the ignition.
2. Disconnect the exhaust gas recirculation (EGR) valve electrical connector.
3. Remove the bolt retaining the pipe assembly from the EGR valve and carefully pull the pipe assembly back.
4. Remove the EGR valve retaining bolts.
5. Remove EGR valve assembly.
6. Remove the gasket.
7. Clean the EGR valve mounting surface.
INSTALLATION PROCEDURE
1. Install the EGR valve with a new gasket to the intake manifold.
NOTE: Refer to Fastener Notice in Service Precautions.
2. Install the bolts through the EGR valve.
Tighten
Tighten the bolts to 30 N.m (22 lb ft).
3. Connect the pipe assembly to the EGR valve.
4. Install the bolts.