Grand AM V6-3.4L VIN E (2001)
Fuel Supply Line: Service and Repair
Chassis
REMOVAL PROCEDURE
1. Relieve the fuel system pressure. Refer to Fuel Pressure Relief Procedure.
2. Disconnect the quick-connect fittings at the engine compartment fuel feed and return pipes. Refer to Quick Connect Fitting(s) Service (Plastic
Collar).
3. Plug the fuel pipes.
4. Raise the vehicle. Refer to Lifting and Jacking the Vehicle.
5. Disconnect the quick-connect fittings at the fuel sender fuel feed and return connecting pipes. Refer to Quick Connect Fitting(s) Service (Metal
Collar).
6. Remove the exhaust heat shield.
7. Remove the fuel pipe mounting bolts from the body clips.
In the repairable areas, cut a piece of fuel hose 100 mm (4 in) longer than portion of the pipe removed. If more than a 152 mm (6 in) length of pipe
is removed, use a combination of steel pipe and hose so that hose lengths will not be more than 254 mm (10 in), including the hose overlap on the
fuel pipe.
8. Remove the fuel pipes from the body clips.