Grand AM V6-3.4L VIN E (2001)
2. Install the TP sensor on the throttle body assembly.
NOTE: Refer to Fastener Notice in Service Precautions.
3. Install the 2 TP sensor fasteners, using a thread-locking compound on the screws. Loctite(R) 262, GM P/N #1052624, or equivalent should be
used.
Tighten
Tighten the TP sensor attaching screws to 2.0 N.m (18 lb in).
4. Connect the TP sensor electrical connector.
5. Connect the EVAP purge line.
6. Connect the fuel lines. Refer to Quick Connect Fitting(s) Service (Metal Collar).