Grand AM V6-3.4L VIN E (2001)
Seat Belt Height Adjuster: Service and Repair
SEAT BELT HEIGHT ADJUSTER REPLACEMENT - FRONT
REMOVAL PROCEDURE
1. Remove the center pillar upper trim panel.
2. Remove the front seat shoulder belt guide track cover.
3. Remove the front seat shoulder belt guide track bolts.
4. Remove the front seat shoulder belt guide track.
INSTALLATION PROCEDURE
1. Install the front seat shoulder belt guide track.
NOTE: Refer to Fastener Notice in Service Precautions.
2. Install the front seal shoulder belt guide track bolts.
Tighten
Tighten the front seat shoulder belt guide track bolts to 41 N.m (32 lb ft).
3. Install the front seat shoulder belt guide track cover.
4. Install the center pillar upper trim panel.