Grand AM V6-3.4L VIN E (2001)
Seat Belt Retractor: Service and Repair
Rear
REMOVAL PROCEDURE
1. Remove the rear seat cushion.
2. Remove the rear seat back cushion.
3. Remove the rear window panel trim panel.
4. Remove the sound insulator from the rear window trim panel.
5. Remove the rear seat belt retractor anchor plate bolt.
6. Remove the rear seat belt retractor bolt (1).
7. Remove the rear seat outer retractor side belt.
INSTALLATION PROCEDURE
IMPORTANT: Remove any twists in the seat belt webbing before final assembly.
1. Install the rear seat outer retractor side belt.
NOTE: Refer to Fastener Notice in Service Precautions.
2. Install the rear seat belt retractor bolt (1).
Tighten
Tighten the rear seat belt retractor bolt to 36 N.m (27 lb ft).
3. Install the rear seat belt retractor anchor plate bolt.
Tighten
Tighten the rear seat belt retractor anchor plate bolt to 42 N.m (31 lb ft).