Grand AM V6-3.4L VIN E (2001)
5. Install the strut to knuckle nuts.
Tighten
Tighten the nuts to 180 Nm (133 ft. lbs.).
Front Caster Adjustment
The caster is not adjustable. If the caster angle is not within specifications, inspect for suspension support misalignment or front suspension damage.
Replace the parts as necessary. The alignment checking lists measurement points in order to determine the proper underbody alignment.
Front Wheel Toe Adjustment
1. Ensure that the steering wheel is set in a straight ahead position.
2. Loosen the tie rod jam nut (5).
3. Adjust the toe to specification by turning the adjuster (6). Refer to Wheel Alignment Specifications.
Notice: Refer to Fastener Notice in Service Precautions.
4. Install the tie rod jam nut (5).
Tighten
Tighten the tie rod jam nut (5) to 68 Nm (50 ft. lbs.).
