Grand AM V6-3.4L VIN E (2001)
Power Steering Line/Hose: Service and Repair
P/S Return Line Replacement
Removal Procedure
1. Remove the drive belt from the power steering pump pulley.
2. Remove the power steering hose retaining nut (1) and the retaining bracket (2).
3. Remove the power steering return hose (3) from the power steering pump (1).
4. Raise the vehicle on a hoist. Refer to Vehicle Lifting.
5. Remove the power steering return hose (3) from the retainer (6).
6. Remove the power steering return hose (3) from the power steering gear (5).
7. Remove the power steering return hose (3) from the vehicle.
Installation Procedure
Notice:
-
Refer to Installing Hoses Without Twists or Bends Notice in Service Precautions.
-
Refer to Fastener Notice in Service Precautions.