Grand AM V6-3.4L VIN E (2001)
9. Remove the clutch pedal and bracket mounting nuts.
10. Remove the clutch pedal and bracket assembly.
Installation Procedure
1. Install the clutch pedal and bracket assembly.
Notice: Refer to Fastener Notice in Service Precautions.
2. Install the clutch pedal and bracket mounting nuts.
^
Tighten Start with the lower nuts, tighten the nuts to 23 Nm (17 ft. lbs.).
3. Install the instrument support bracket bolt.
4. Install the instrument panel support beam.
5. Install the clutch master cylinder pushrod bushing on the pedal. Lubricate the bushing.
6. Install the clutch master cylinder pushrod to the clutch pedal.
7. Install the cruise control switch.