Grand AM V6-3.4L VIN E (2001)
Windshield Washer Reservoir: Service and Repair
Washer Solvent Container Replacement
REMOVAL PROCEDURE
1. Raise the vehicle.
2. Remove the left front fender liner.
3. Remove the air intake duct.
4. Remove the connector from the washer pump.
5. Remove the hose from the washer pump.
6. Remove the connector from the solvent level sensor.
7. Remove the EBCM.
8. Remove 3 screws and the washer solvent container from the vehicle.
INSTALLATION PROCEDURE
NOTE: Refer to Fastener Notice in Service Precautions.